HOME USED PARTS TOUR TECH AND SPECS CONTACT US



Instructions for Installing CCS1300

Start by removing the left side lower fairing and coolant reservoir.
Remove water pump housing bolt, front clutch slave cylinder bolt, top & bottom countershaft sprocket cover bolts.
Place support around slave cylinder lining up holes as shown. Bend coolant pipe out for clearance if necessary.
Place appropriate standoffs behind support and install the appropriate length bolts as shown in the image below.
Hand-tighten all bolts being careful not to over tighten.
Reinstall coolant reservoir & lower fairing.



American Performance Engineering Inc. - 7347 Rosamond Bl. Rosamond, Ca. 93560 - (661) 256-7309